-40%
AT301 Oral X-Ray Digital sensor imaging system APS CMOS USB Port
$ 1264.02
- Description
- Size Guide
Description
Dental digital x-ray imaging system is consisted of sensor, image controller, image capture systemand connection cable (USB port) , connected with PC or notebook via USB cable.
The power of controller and sensor is supplied by USB port, require no battery or power charge system.
The whole equipment need to work together with imaging software.
1.11 AT-301 sensor
The sensor and control box is connected already, please check the light on control box, before taking x-ray image.
The power indicator on the control box displays yellow light and working indicator flash green light.
The sensor active surface is flat including the size 1 and size 2.
u
Size1, universal sensor---Use for regular procedures, both for children and adult .
u
Size2 sensor---Use for bitewings procedures.
The sensor non-reactive to X-Rays surface, contains the cable attachment.
Figure 2 AT-301Sensor
1 Sensor non-reactive to X-Rays surface
2 Sensor active surface
1.12 Control Box
The sensor control box contains all the electronics of the sensor. The two LED light shows whether the sensor is workable.
Figure 3
1.2 Technical Specifications
Sensor: APS CMOS sensor
External dimension (mm) :44×32() ;
40×26(AT-301)
Sensor Active Area : 36×27() ; 30×22.5(AT-301)
Sensor Thickness : 6mm
Dynamic Range : 0~4,096
Power : 5V±0.5V
Image Transfer :USB2.0
Cable Length :.
≥
3m