MG Chemicals 9200 Structural Adhesive, 50 mL Dual Cartridge

Description

Browse Shop
Feedback
Contact
Part No |
MG9200-50ML
MG Chemicals 9200 Structural Adhesive, 50 mL Dual Cartridge
Ask Question
Save Seller
SHORT DESCRIPTION
The 9200 Structural Epoxy Adhesive is a two-part, thixotropic, toughened adhesive
FULL US SUPPORT
We offer full US support on all the products we sell.. Please feel free Contact us by phone or email if you have any queries regarding our products
HOURS OF OPERATION
Monday through Friday from 08:30AM - 5:00PM (EST)
Product Features
Toughened, smooth, thixotropic paste
1:1 mix ratio
Working life: 30 minutes
Cure time: 24 hours at room temperature
Non-sagging and gap filling
Very strong adhesion
Bonds dissimilar materials
Highly resistant to vibration and temperature cycling
Extreme chemical resistance
Low shrinkage
Description
The 9200 Structural Epoxy Adhesive is a two-part, thixotropic, toughened adhesive that is designed to create load bearing joints. It offers excellent adhesion to a wide range of difficult to bond to materials, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates such as SMC (sheet molding compound) and GRP (glass-reinforced plastics).
The toughened adhesive protects against vibration damage when fully cured, but remains sufficiently flexible to accommodate thermal cycling stresses when bonding materials with different coefficients of thermal expansion.
The 9200 is electrically insulating and chemically resistant, which helps prevent corrosion damage. It has an excellent chemical resistance to moisture, salt water, detergents, gasoline, hydraulic fluids, antifreeze, automotive fluids, acids, and bases. In addition, dissimilar metals can be bonded together without fear of causing galvanic corrosion because the adhesive prevents current flow through the bond.
Applications & Usages
This adhesive is primarily used for creating long lasting load bearing joints, especially in situations where vibration resistance is key or where dissimilar materials are being joined. It is especially suitable for sheet molding compound (SMC) and glass-reinforced plastics (GRP) bonding. It is thixotropic, which makes it a great gap filler and is sag resistant—perfect for use on vertical surfaces.
It is also excellent for potting electronics, especially when the enclosure has holes or seams where a nonthixotropic potting compound would flow through. It provides superior environmental protection and performs very well under temperature cycling.
Visit Us
SRA Solder Dept
24 Walpole Park S
STE: 10
Walpole
MA 02081
Customer Support
Mon - Fri 8:30AM to 5:00PM (EST)
About us
SRA Solder is a division of SRA Shops formerly Stan Rubinstein Assoc., Inc. has been in business since 1962.
We are committed to providing each customer with the highest standard of customer service.
Why SRA Solder Products?
Full US Support
Same Day Dispatch
Specialist Store
Quality Products
Ebay links
Our Store
Other Items
Feedback
Send message
Contact
Address: 24 Walpole Park S, STE 10, Walpole, MA 02081
Mon - Fri 8:30am to 5:00pm (EST)