W&H Assistina 301Plus Dental Handpiece Cleaning & Lubricating Machine For Dental

Description

Features
·
Cleaning and lubrication of the internal components with Service Oil through rotation
·
Optimum cleaning of the spray water and spray air channels with cleaning fluid
·
Flushing through with compressed air
Assistina
301 plus
Air consumption:
approx. 60 Nl/min.
Operating pressure:
4 - 10 bar
(controlled via an integrated automatic pressure controller)
Max. volume:
63 dB
Height / Width / Depth:
223 mm x 190 mm x 415 mm
Weight:
2.7 kg
Capacity:
250 ml W&H Cleaning fluid, MC-1000
250 ml W&H Service Oil F1, MD-500
Designed for:
Straight and contra-angle handpieces, turbines,
air motors and air-driven scalers
Description
Maintenance at the touch-of-a-button
Assistina 301 plus with base adaptor
The maintenance process starts automatically at the touch of a button. After only 35 seconds, the instrument is perfectly maintained.
The automatic rotational lubrication ensures optimum distribution of the oil and that an even film of lubricant is created. Dirt particles are loosened and removed. The lifespan of the instruments is increased significantly whilst service costs are reduced.
MAINTENANCE AT THE TOUCH-OF-A-BUTTON
01 Connect the instrument. Close the cover.
02 Press the button. Maintenance program starts automatically.
03 After 35 seconds, the cleaning and lubrication process is finished leaving a perfectly maintained instrument.
ROTATIONAL LUBRICATION
01 Contra-angle handpiece gearing after conventional maintenance with oil spray can
02 Contra-angle handpiece gearing after Assistina maintenance with rotational lubrication
The automatic rotational lubrication ensures the optimum flow of oil to internal components, whilst grime and other matter is removed by the cleaning fluid, resulting in minimal friction, less wear and longer life.
Because of the dispensing system, only a small amount released during each maintenance cycle optimum lubrication, making it very no need for further lubrication.
Packaging
·
1 unit
Direction to Use
How can I check if my Assistina 301 is working correctly?
Check/replace the O-rings on the motor coupling/adapter (FAQ video Assistina O-rings). Ensure that the Start button is held depressed for at least 2 seconds when starting a programme. When the button is pressed, the green ball should be visible on the right in the functional display (cleaning solution). When the button is then released again, the green ball should be shown on the left. This procedure is also demonstrated in the FAQ video "Using Assistina". A detailed functional check can be found in the "weekly checklist" and in the "Test and functional check" section of the instructions for use.
How much air pressure does the Assistina 301 plus require in order to operate properly?
The pressure should be between 4 - 10 bar (58 to 145 psi).
Warranty
·
Manufacturer/Importer warranty of 12 months as applicable for this product.
·
Service and Warranty are handled by the manufacturer/importer directly for this product
·
We
will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
·
We and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
·
Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and we may assist the customer in registering a request to get the Product replaced or serviced.
·
The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.
DISCLAIMER
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, please not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.